中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 9870.1-2006 硫化橡胶或热塑性橡胶动态性能的测定 第1部分:通则(中英文版) Rubber, vulcanized or thermoplastic - Determination of dynamic properties - Part 1: General guidance |
|||
SN/T 1829-2006 石油焦炭中铝、钡、钙、铁、镁、锰、镍、硅、钠、钛、钒、锌含量测定 电感耦合等离子体原子发射光谱(icp-aes)法(中英文版) Determination of aluminum,barium,calcium,iron,magnesium,manganese,nickel,silicon,sodium,titanium,vanadium,zinc in petroleum coke. Inductively coupled plasma atomic emission spectrometric method(ICP-AES) |
|||
GB/T 11067.3-2006 银化学分析方法 硒和碲量的测定 电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of silver - Determination of selenium and tellurium content - Inductively coupled plasma atomic emission spectrometric method |
|||
GB/T 11067.4-2006 银化学分析方法 锑量的测定 电感耦合等离子体原子发射光谱法(中英文版) Methods for chemical analysis of silver - Determination of antimony content - The inductively coupled plasma atomic emission spectrometric method |
|||
GB/T 12812-2006 硬质泡沫塑料 易碎性的测定(中英文版) Rigid cellular plastics - Determination of friability |
|||
GB/T 20672-2006 硬质泡沫塑料 在规定负荷和温度条件下压缩蠕变的测定(中英文版) Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions |
|||
GB/T 20673-2006 硬质泡沫塑料 低于环境温度的线膨胀系数的测定(中英文版) Cellular plastics - Determination of the coefficient of linear thermal expansion of rigid materials at sub-ambient temperatures |
|||
GB/T 12833-2006 橡胶和塑料 撕裂强度和粘合强度测定中的多峰曲线分析(中英文版) Rubber and plastics - Analysis of multipeak traces obtained in determinations of tear strength and adhesion strength |
|||
GB/T 1040.2-2006 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件(中英文版) Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics |
|||
GB/T 1040.3-2006 塑料 拉伸性能的测定 第3部分:薄膜和薄片的试验条件(中英文版) Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets |
|||
GB/T 12829-2006 硫化橡胶或热塑性橡胶小试样(德尔夫特试样)撕裂强度的测定(中英文版) Rubber, vulcanized or thermoplastic - Determination of tear strength of small test pieces (Delft test pieces) |
|||
GB/T 1040.4-2006 塑料 拉伸性能的测定 第4部分:各向同性和正交各向异性纤维增强复合材料的试验条件(中英文版) Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites |
|||
SN/T 1796-2006 进出口木材及木制品中砷、铬、铜的测定 电感耦合等离子体原子发射光谱法(中英文版) Determination of arsenic,chromium,copper in wood and wood-based products for import and export. Inductivly coupled plasma atomic emission spectrometry |
|||
GB/T 1040.1-2006 塑料 拉伸性能的测定 第1部分:总则(中英文版) Plastics - Determination of tensile properties - Part 1: General principles |
|||
GB/T 6730.63-2006 铁矿石 铝、钙、镁、锰、磷、硅和钛含量的测定 电感耦合等离子体发射光谱法(中英文版) Iron ores―Determination of aluminum,calcium,magnesium,manganese,phosphorus,silicon and titanium content―Inductively coupled plasma atomic emission spectrometric method |
|||
QB/T 2803-2006 硬质塑料管材弯曲度测定方法(中英文版) Determination of deflection for rigid plastic pipes |
|||
GB/T 8757-2006 砷化镓中载流子浓度等离子共振测量方法(中英文版) Determination of carrier concentration in gallium arsenide by the plasma resonance minimum |
|||
SN/T 2004.5-2006 电子电气产品中铅、汞、镉、铬、溴的测定 第5部分:电感耦合等离子体质谱法(icp-ms)(中英文版) Determination of chromium,cadmium,mercury,lead and bromine in electrical and electrical and equipment. Part 5: Inductively coupled plasma mass spectrometric method |
|||
GB/T 20246-2006 声学 用于评价环境声压级的多声源工厂的声功率级测定 工程法(中英文版) Acoustics - Determination of sound power levels of multisource industrial plants for evaluation of sound pressure levels in the environment - Engineering method |
|||
SN/T 2004.4-2006 电子电气产品中铅、镉、铬、汞的测定 笫4部分:电感耦合等离子体原子发射光谱法(中英文版) Determination of Lead,Cadmium, Chromiun and Mercury in electrical and electronic equipment. Part 4: Inductively coupled plasma atomic emission spectrometric method |
找到:1383條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: [49] [50] [51] [52] [53] [54] [55] |